When winter comes, do you want to swim freely like in summer?
It’s OK to have such a private swimming pool.
Villa private swimming pool decoration “real stuff”, take you to enjoy the ultimate life this winter!
Villa swimming pool design – supporting functional area design
1. It is divided into a deep water area and a children’s water playing area, which shall be marked at the display. The depth of the deepwater area shall not be less than 1.8m, and the depth of the children’s water playing area shall not exceed 0.48M.
2. Outer walkway: the outer walkway of the swimming pool shall be designed for anti-skid and easy scouring. A drainage ditch shall be set at the outer edge of the walkway, and the sewage shall be discharged into the sewer. (indoor family swimming pool can not be used)
3. Foot soaking disinfection pool: a forced through foot soaking disinfection pool shall be set in the middle of the walkway leading to the swimming pool (the length of the pool shall not be less than 2m, the width shall be the same as the walkway, and the depth shall be 200mm). (family swimming pool can also be set)
4. Rest area (comfortable lounge chair, drinking area, wine tasting area, etc.)
5. Dressing room (convenient dressing, bath towel, clothes, etc.)
6. Spa function (beauty, stress relief, and health preservation)
7. High-temperature bubble pool (you can take a bubble before spa)
8. Sweat steaming room.
Modern style
European style
Villa swimming pool design – supporting configuration design
1. Water treatment system (water supply system, drainage system, water quality filtration system)
2. Safety protection cover of swimming pool (safety, thermal insulation, saving, cleaning, improving air environment and environmental protection)
3. Swimming pool circulating equipment: water pump (plastic pump, cast iron pump, copper pump, stainless steel pump, etc.)
4. Filtration equipment: quartz sand filter (sand tank), diatomite filter, paper core filter, vacuum negative pressure fine flow filter, ceramic membrane filter, etc. Dehumidification equipment: multifunctional dehumidification heat pump (three in one heat pump) constant temperature equipment: air source heat pump, solar energy, boiler, electricity, etc.
5. Pool water heating system (maintain the temperature of pool water)
6. Indoor constant temperature and humidity air conditioning system of swimming pool. (keep indoor comfortable temperature and humidity)
7. Dehumidification equipment: multifunctional dehumidification heat pump (three in one heat pump)
Thermostatic equipment: air source heat pump, solar energy, boiler, electricity, etc.
Villa swimming pool design – water supply and drainage design
1. Water supply inlet setting
①. The quantity shall meet the requirements of circulating flow; The calculation of circulating flow shall meet the calculation data of professional designers.
② . the location shall meet the requirements of uniform water flow in the swimming pool without vortex and dead water;
③. when the water inlet is allocated at the bottom of the pool, it shall be evenly arranged in the middle of the signature lines of the two swimming lanes;
④. When the water supply inlet is provided on the pool wall, the distance between them should be 2 ~ 3M, and the distance from the corner to the other pool wall should not exceed 1.5m; The depth should be 0.5 ~ 1.0m below the water surface of the swimming pool;
⑤. When the diving swimming pool adopts pool wall water distribution, two-layer water supply outlets shall be set, and the upper and lower water supply outlets shall be staggered. The height from the water supply inlet to the pool bottom shall not be less than 0.5m.
2. Setting of water return port:
①. The quantity shall meet the requirements of circulating flow;
② . the location shall try to make the pool water flow circulate evenly and no short flow occurs;
③. During overflow circulation, overflow return tanks shall be set around or on both sides of the outer wall of the tank, and the overflow weir must be strictly horizontal.
3. Drainage system setting:
①. drain: the swimming pool shall be provided with a drain at the lowest part of the pool bottom. If possible, the outlet should be combined with the return outlet. The outlet shall be provided with a grating cover plate, and the surface of the cover plate shall be level with the lowest surface at the bottom of the swimming pool.
②. overflow tank drainage: overflow tanks shall be set around or on the outside of both sides of the swimming pool, and the overflow weir shall be strictly horizontal. The width of the overflow tank shall not be less than 150mm, the diameter of the drainage pipe in the tank shall not be less than 50mm, and the spacing shall not be greater than 3m.
③. Slope drainage: when designing the indoor adult swimming pool, the slope shall be set at the bottom of the swimming pool, the drainage channel, and the surrounding rest area platform according to the specifications, to ensure smooth natural drainage.
④. Equipment dehumidification: the indoor air relative humidity of the swimming pool is too high. When the indoor and outdoor temperature difference is large in winter, it is easy to form condensate (condensation), and sometimes it is easy to drip from the ceiling. To avoid this phenomenon, a dehumidifier can be set in the swimming pool area, and the equipment model, power, and other relevant parameters are designed, calculated, and configured by the installation discipline.
