There are two main ways to measure the size of a pool – using a tape measure or measuring the pool’s volume. If you want to know how to measure the size of a pool, read on for some tips!
![swimming pool](https://waltmosaic.com/wp-content/uploads/2022/10/图片1.png)
Measure the rectangle pool
If you’re planning to build a pool, one of the first things you’ll need to do is measure the size of the area you have to work with. This will help you determine what type and size of pool you can install. Measuring the size of your pool area is a simple process that only requires a tape measure and a little bit of math.
Start by measuring the length and width of the rectangular area where your pool will be located. To get the most accurate measurements, use a tape measure that is at least 50 feet long. Once you have the length and width, multiply these numbers together to get the square footage of your pool area.
For example, if your pool area is 10 feet wide by 20 feet long, the square footage would be 200 square feet.
Keep in mind that you’ll also need enough space around your pool for decking or patio furniture. A good rule of thumb is to add an additional 10-15% to your total square footage to account for this. So, in our example above, you would need an additional 20-30 square feet of space to account for decking or furniture.
After you’ve measured the size of your pool
![swimming pool](https://waltmosaic.com/wp-content/uploads/2022/10/图片2.png)
Measure the round pool
If you’re planning to install a pool, you’ll need to measure the size of the area where it will go. This is especially important if you’re working with a pre-formed or vinyl liner pool, which comes in a limited number of sizes. Measuring the size of the pool area may seem like a daunting task, but it’s actually quite simple. Just follow these steps and you’ll have the measurements you need in no time.
To measure the size of your pool area, you’ll need a tape measure and a helper. Start by measuring the length and width of the area where the pool will go. Then, use the tape measure to find the diameter of the pool. Once you have all of these measurements, you can calculate the square footage of the pool area using this formula: length x width = square footage.
Now that you know how to measure the size of your pool area, you can start shopping for your perfect pool!
![swimming pool](https://waltmosaic.com/wp-content/uploads/2022/10/图片3.png)
Measure the irregular shape pool
There are many different ways to measure the size of an irregularly shaped pool. The most common way is to use a measuring tape or ruler to measure the length and width of the pool. You can also use a laser measuring device to give you a more accurate measurement.
![swimming pool](https://waltmosaic.com/wp-content/uploads/2022/10/图片4.png)
For more measurement way, just contact Walt Mosaic Company
At Walt Mosaic Company, we have a lot of experience measuring pools. We can help you measure your pool to get an accurate estimate of the size. We can guide you with the measurement.